State Some Mechanical Properties for Al- Alloy Welded by Seam Welding Technique

Latfe Y. Zedan; Ahmed F. Hassn

doi:10.24237/djes.2010.03106

Authors

Latfe Y. Zedan Department of Mechanical Engineering, College of Engineering, University of Diyala
Ahmed F. Hassn Department of Mechanical Engineering, College of Engineering, University of Diyala

Keywords:

2014 heat treatable aluminum alloy, Seam welding, Mechanical properties

Abstract

The aim of this paper was perpetrated lap joint welding samples welded by seam welding method ,2014 heat treatable aluminum alloy, the paper studied some groups at different variable welding, welding time was studied at electrode pressure 1,1.5 KN with thickness 1.5 mm and another group at 2 mm. after welding process shear strength, Vickers hardness were tested at different variables. The paper stated the best shearing strength at 1.5mm thickness with 45 KA welding current at 1.5 KN electrode pressure. Increase 0.5 mm in thickness lead to decrease 20% of shearing strength.

Downloads

Download data is not yet available.

References

Bolten .W, "engineering material technology" (1998),prentice hall.

.Kulekci .M, Metallurgy ,vol .44,No.3,(2005).

www.harriscal .com , Aluminum welding guide.

Ramanaiah. N, International Symposium of Research Students on Materials Science and Engineering December 20-22, 2004, Chennai, India Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras.

O’Brien, Jefferson’s Welding Encyclopedia , American Welding Society, Miami, 1997 , RL (editor), (1997), ISBN 0-87171-506-6

Li, yajang and et ul ,bull-material sciences, vol.27,no.2,2004 .

Višniakov . N, . 4th International DAAAM Conference "INDUSTRIAL ENGINEERING – INNOVATION AS COMPETITIVE EDGE FOR SME" 29 - 30th April 2004, Tallinn, Estonia.

Zettler .R , WELDING IN THE WORLD ABSTRACTS Volume 50 Issue 11/12 November/December 2006.

Azawa .T ,welding journal ,vol.86,2007.

Latfe, diyala journal ,vol 1,No.1,2008.

Bobyles, welding journal,67,(12),1988.

Stephen .T ,hand book testing and data requirement for aluminum alloy ,USA ,gate way technology ,2007.

Hosseini .H, Material science and engineering ,A335,(2002).

دعبد الرزاق إسماعيل ,تصنيع المعادن ,بغداد و1982.

AFSA, The welding of aluminum MIG,TIG fusion ,2nd edition ,2004 (www.afsa.org.za).

Gene , Mathers ,The welding of aluminum and its alloy ,crc press ,Cambridge ,England ,2002.