NON-LINEAR ANALYSIS OF CONTINUOUS COMPOSITE CONCRETE–STEEL BEAMS UNDER CYCLIC LOADINGS

https://doi.org/10.24237/djes.2011.04109

Authors

  • Ali Laftah Abbas College of Engineering, University of Diyala

Keywords:

Composite beams, continuous beams, concrete-steel beam, deflection, cyclic loads, shear connectors, slip

Abstract

Non-linear analysis of continuous composite concrete–steel beams under cyclic loadings has been investigated in this paper. A three-dimensional finite element analysis (FE) ANSYS computer program(ANSYS version 9.0) was conducted to investigate the nonlinear behaviour of this beam up to failure through the prediction of the values of slip, deflection along the spans of the composite beam for different number of loading cycles up to one million cycles of the load of range (52%of the ultimate load of the beam). The results obtained from analyzing a continuous composite concrete-steel beam under cyclic loadings show good agreement with available experimental results and other available analytical results. A parametric study is also conducted in this paper to study the influence of some parameters such as the number of loading cycles, and the amount of load ratio on the values of slip and deflection. This parametric study shows that as the number of loading cycles increased, slip and deflection values along the composite beam will increased due to reduction in strength of all components of the composite beam, and the absolute values of maximum slip and maximum deflection will reduce as the load ratio changes from negative to positive signs .

Downloads

Download data is not yet available.

Published

2011-06-01

How to Cite

[1]
Ali Laftah Abbas, “NON-LINEAR ANALYSIS OF CONTINUOUS COMPOSITE CONCRETE–STEEL BEAMS UNDER CYCLIC LOADINGS”, DJES, vol. 4, no. 1, pp. 125–143, Jun. 2011.